The test plugs are held in place by the steel
grips while the Neoprene seals - All by
tightening one compression nut!
Provided to Isolate & Test sections of piping
without the need for Flanges! The standard Plugs
can be used for test pressures up to 3,000 psig,
in line sizes from 1/2” to 24” and Schedules 40
or 80 pipe.
Other
sizes and test pressures available.
• Flangeless Hydro-testing of pipe
• Test pressures to 3,000 psig - 5,000 psig
available for Special Orders
• Hardened and plated parts - inhibits corrosion
• Manufactured under our strict Quality
Assurance Program
Warning
A SPECIAL WORD OF CAUTION: Pressure
testing can be an extremely hazardous operation
and safety precautions should be strictly
adhered to. All connections, valves, flanges and
other fittings should be checked for suitability
to test pressure. Verify the line ID & Plug
Range match. Most importantly - Never
stand or pass in front of any test plug or other
enclosure while test is in progress. If plug
discharges during a test, serious injury or
death could occur.
|
