|
 Use our special
brushes to properly prep the tube for optimum sealing &
holding forces - See Plug Size Charts.
-
Jr Brush Kits come with 3 or 4 brushes per kit, dependent on plug size.
Use the smallest Brush in the Kit that effectively cleans and preps the tube.
-
Sr Brushes are provided for the specific tube size ordered.
 Hydraulic Tool
- THE SIMPLEST, SAFEST, AND EASIEST WAY TO
INSTALL SNAP IT SR OR JR PLUGS! The Snap It Installation Kit is compact
and lightweight ( the ram only weighs 7 lbs) yet has plenty of power to easily
install all of our plugs. The pump is air driven and requires 80 to 120 lbs of
supply air@20 CFM during the few seconds it is operated and comes in a
durable storage case on wheels. When ordering the complete kit - it comes
with everything needed for installing Jr or Sr Plugs for near end applications.
Through the tube plugging is performed with this tool by adding the appropriate
number of extension assemblies with a Channel Head Pull Rod Assembly
and following the “Through the Tube” instructions. Peace of Mind—when you
order this complete kit.
 Pull Rod Assembly
- Used with the Hydraulic RAM, this installs
the plug(s) in place. Our assemblies are fully interchangeable with
competitors’ systems and have been designed to minimize your costs
by utilizing multiple Plug Positioners with each Pull Rod Size - See Plug Size Chart.
 Channel Head Pull Rod Assemblies & Extension Sets
-
Used to operate the system and easily install plugs where Channel Heads
are present. Also these are used in conjunction with the Extension Sets
for through the tube plugging—See Plug Size Chart.
 Plug Removal Tool
- Designed to easily and quickly remove installed
plugs. The Plug Removal Tool removes both the Pin and Ring in seconds
without damage to the tube it was installed in. Simply screw the Spear Stud
into the installed Pin, dislodge the pin with the slide hammer, screw the
Spear into the Ring, then use the slide hammer to pull out all the pieces.
If required, a new plug can then be reinstalled in the same place!
NOTE: Contact Factory for Sizing details.
|
