|
CONDENSER & BOILER
"8012" SERIES TUBE EXPANDER
|
|
Features
|
- Popular Expander, especially suited for larger diameter
tubes and thick tubesheets
- 3 Rollers per expander
- Available in 3 different lengths to best suit your
needs
- Tube Sizes - 1 ¾" 8 Gauge to 5" 16 Gauge
(1.368" to 4.606" ID)
- Roll Sets - 2 ¼"
- Roll Depth - Adjustable: "STD" from ½" to
4" - “A" from ½" to 6" - “B" from ½" to
8"
|
Back to Top
"114" SERIES TUBE EXPANDER
|
|
Features
|
- Very Popular Expander, especially suited for larger
diameter tubes where flaring is needed
- Self Feeding parallel expanding
- 4 Rollers per expander with 2 flaring rollers.
Overlapping rolls to prevent ridging of tube.
- Available in 5 different lengths to best suit your
needs
- 40 degree flare angle
- Tube Sizes - 2" 4 Gauge to 4 ½" 12 Gauge
(1.421" to 4.468" ID)
- Roll Depth - Available in the following
combinations: ½" to 7/8", ¾" to 1 1/8", 1 1/8" to 1
5/8", 1 5/8" to 2 1/8", 2 1/8" to 2 5/8".
|
Back to Top
"A" SERIES TUBE EXPANDER
|
|
Features
|
- Best Value for the Money when parallel rolling.
- 3 Rollers per expander, non-flaring
- Available in 5 different lengths to best suit your
needs
- Tube Sizes - 7/8" 15 Gauge to 4 ½" 12 Gauge
(.712" to 4.456" ID)
- Roll Depth - Available in the following
combinations: ½" to 7/8", ¾" to 1 1/8", 1 1/8" to 1
5/8", 1 5/8" to 2 1/8", 2 1/8" to 2 5/8"
|
Back to Top
"AF3" SERIES TUBE EXPANDER
|
|
Features
|
- Best Value for the Money when flaring of tube ends
is needed.
- 3 Flaring Rollers per expander with overlapping of
rolls to prevent ridging of tubes.
- Available in 5 different lengths to best suit your
needs
- 30 degree flare angle
- Tube Sizes - 7/8" 15 Gauge to 4 ½" 12 Gauge
(.712" to 4.456" ID)
- Roll Depth - Available in the following
combinations: ½" to 7/8", ¾" to 1 1/8", 1 1/8" to 1
5/8", 1 5/8" to 2 1/8", 2 1/8" to 2 5/8"
|
Back to Top
"AB" SERIES TUBE EXPANDER
|
|
Features
|
- “A" Series with special thrust bearings added to
increase tool life.
- 3 Rollers per expander, non-flaring
- Available in 5 different lengths to best suit your
needs
- Tube Sizes - 7/8" 15 Gauge to 4 ½" 12 Gauge
(.712" to 4.456" ID)
- Roll Depth - Available in the following
combinations: ½" to 7/8", ¾" to 1 1/8", 1 1/8" to 1
5/8", 1 5/8" to 2 1/8", 2 1/8" to 2 5/8"
|
Back to Top
"ABF3" SERIES TUBE EXPANDERS
|
|
Features
|
- “AF3" Series with special thrust bearings added to
increase tool life.
- 3 Flaring Rollers per expander with overlapping of
rolls to prevent ridging of tubes.
- Available in 5 different lengths to best suit your
needs
- 30 degree flare angle
- Tube Sizes - 7/8" 15 Gauge to 4 ½" 12 Gauge
(.712" to 4.456" ID)
- Roll Depth - Available in the following
combinations: ½" to 7/8", ¾" to 1 1/8", 1 1/8" to 1
5/8", 1 5/8" to 2 1/8", 2 1/8" to 2 5/8"
|
Back to Top
"P-1000" SERIES TUBE EXPANDER
|
| Features |
- 3 Flaring Rollers per expander with overlapping of
rolls to prevent ridging of tubes.
- Overlapping flare rolls ideal for use in limited
access space like water boxes, small diameter drums.
- Available in 5 different lengths to best suit your
needs
- 30 degree flare angle
- Tube Sizes - 1" 13 Gauge to 4 ½" 14 Gauge
(..775" to 4.407" ID)
- Roll Depth - Available in the following
combinations: ½" to ¾", 7/8" TO 1 ¼"", 1 3/8" to 13/4",
1 7/8" to 2 1/4", 2 3/8" to 2 3/4"
|
Back to Top
"P-2000" SERIES TUBE EXPANDER
|
|
Features
|
- Spring loaded drift thrust assembly used to
position the expander accurately on the boiler tube for
consistent expansions.
- 3 Flaring Rollers per expander with overlapping of
rolls to prevent ridging of tubes.
- Overlapping flare rolls ideal for use in limited
access space like water boxes, small diameter drums.
- Available in 5 different lengths to best suit your
needs
- 30 degree flare angle
- Tube Sizes - 1" 13 Gauge to 4 ½" 14 Gauge
(..775" to 4.407" ID)
- Roll Depth - Available in the following
combinations: ½" to ¾", 7/8" TO 1 ¼"", 1 3/8" to 13/4",
1 7/8" to 2 1/4", 2 3/8" to 2 3/4"
|
Back to Top
"P-3000" SERIES TUBE EXPANDER
|
|
Features
|
- 3 plain rollers and thrust bearing
- Used for boiler tube sheets and drums thicker than
2.3/4", normally used in conjunction P-1000, P-2000
series.
- Tube Sizes - 1 1/4" 16 Gauge to 4 ½" 14
Gauge (1.055" to 4.407" ID)
- Roll Depth - Available in the following
combinations: ½" to 4 3/8", 1 ½" to 5 3/8"
|
Back to Top
COMBINATION BEADING EXPANDER
|
|
Features
|
- Tube Expansion & Beading in Single Operation, 20%
reduction in time
- Tube Sizes - 2" 10 Gauge to 3" 12 Gauge
(1.700" to 2.980" ID)
|
Back to Top
"V" SERIES COLLINS TUBE EXPANDER
|
|
Features
|
- Used for Boilers having thin tube sheets
- Nonparallel rolling, self-feeding expander is
excellent for close quarter tube expanding
- Self-contained rolls give slight flare to tube
ends.
- Works twice as fast as other conventional expanders
- Tube Sizes - 1" 10 Gauge to 3" 13 Gauge
- Roll Depth - 3 5/16" or 4"
|
Back to Top
Site Map
March 10, 2010
Copyright © USA Industries, Inc. 2004
Designed and Hosted by
Businelle Company Technologies
Count: 002425
|
