|
SUGAR MILL
"SB" SERIES (5 roll) TUBE EXPANDER
|
| Features |
- 5 plain rollers.
- Used primarily for expanding top end thin walled tubes in
Sugar Mills.
- Tube Sizes – 1 1/2” 11 Gauge to 4 ½” 8 Gauge (1.141”
to 4.452” ID)
- Roll Depth – Available in the following
combinations:1 ¼”, 1 ½”, 2”
|
Back to Top
"CSB" SERIES (5 roll) TUBE EXPANDER
|
| Features |
- 5 plain rollers.
- Used primarily for expanding bottom plates in thin walled
tubes in Sugar Mills.
- Tube Sizes – 1 1/2” 11 Gauge to 4 ½” 8 Gauge (1.141”
to 4.452” ID)
- Roll Depth – Standard sizes 5.6 feet to 11.5 feet -
Up to 18 feet length’s available.
|
Back to Top
NAVY
"E" SERIES FLARING TYPE EXPANDER
|
| Features |
- Made to meet current military specifications MIL-E-17624
(SHIPS) for shipyards doing naval work.
- Available in variety of sizes with short and long series
mandrels
|
Back to Top
"E" SERIES LONG REACH TYPE EXPANDER
|
| Features |
- Made to meet current military specifications MIL-E-17624
(SHIPS) for shipyards doing naval work.
- Available in variety of sizes with short and long series
mandrels
- Tube Sizes – 1 to 4 ½”
- Roll Depth – 2 ½” to 5”
|
Back to Top
"E" SERIES LONG REACH ADJUSTABLE TYPE
|
| Features |
- Made to meet current military specifications MIL-E-17624
(SHIPS) for shipyards doing naval work.
- Available in variety of sizes with short and long series
mandrels
- Tube Sizes – 1 to 4 ½”
- Roll Depth – 4 ½” to 6 3/4”
|
Back to Top
"AL" SERIES TUBE EXPANDER
|
| Features |
- Enlarges the ends of copper, brass, and aluminum tubing so
that another tube of same size may be inserted into expanded
section and soldered for leak-resistant joint.
- Designed to leave 0.015 " clearance for slip fit
- Tube Sizes – 5/16” to 1 5/8” (.33” to 1.64” ID)
- Roll Depth – 5/8” to 1”
|
Back to Top
DIESEL ENGINE EXPANDER
|
| Features |
- Designed for rolling injector sleeves into heads of diesel
engines. These expanders are made to order for each application
and a detailed drawing of the injector sleeve and engine head
is needed.
|
Back to Top
PR EXPANDER
|
| Features |
- The rapid taper on mandrel allows full expansion of tube
with minimum travel of mandrel. Mandrel is retained at rear of
expander with nut to allow use near sharp tube bends.
|
Back to Top
STEP ROLLING EXPANDER
|
| Features |
- Expander cage has grooves spaced 1" apart and fitted with a
spring- loaded, quick-spacing thrust collar that permits fast
step rolling in 1" increments throughout full thickness of tube
sheet.
- Ideally suited for faster tube rolling in tube sheets that
are 10" and thicker.
- Perfect for Baffle Plate Expansion
- Available in lengths up to 236”
|
Back to Top
"PST" PIPE SIZING TOOL
|
| Features |
- PST Series pipe sizing expanders are designed to true pipe
ends, and to enlarge the pipe diameter to provide the correct
clearance between the pipe O.D. and the I.D. of a fitting
before making a silver solder or brazed joint. The threaded
mandrel allows minute adjustments for accurate sizing of the
pipe end.
|
Back to Top
Site Map
March 11, 2010
Copyright © USA Industries, Inc. 2004
Designed and Hosted by
Businelle Company Technologies
Count: 001205
|
