TUBE REMOVAL

• WIRELESS connectivity to the pulling gun.
• Two speed pump provides the fastest cycling speeds available.
• RSR-50E free pulling speed of up to 18 feet/minute. 3 PH 440 VAC
• RSR-75E free pulling speed of up to 28 feet/minute. 3 PH 440 VAC
• RSR50P free pulling speed of up to 19 feet/minute. AIR - 180 CFM
• All Units portable with handles and mounted on wheels for easy maneuvering.

• WIRELESS connectivity to the puller
• Proximity switches used in place of micro switches for longer life
• HPG-15 used for High Speed & light duty condenser work
• HPG-30 used for heavy duty heat exchanger and light boiler work
• HPG-45 for heavy duty stub pulling in boilers

• Spears
• Rear Jaw Sets
• Front Jaw Sets
• Nose Piece
• Spring Balancer for supporting the Pulling Gun

---

• These Items will Replace & Interchange with the "Maus" or "Tuberunner" consumables.

• Has a Jaw set that "grips" the spear AND the Tube.
• An economical alternative to the Rhino Sr. Runner tube puller
• 6" of stroke and 30 tons of force.

• Spears
• Rear Jaw Sets
• Nose Piece
• Spring Balancer for supporting the Pulling Gun

---

• These Items will Replace & Interchange with the "Tube Tugger" or "Super Jenny" consumables.

• Our "Captain America" puller - Fast, Easy, Dependable pulling unit used to pull stubs or entire tubes with 10 tons of "Power"
• 4" of pull in single, quick stroke.
• Single person operation and fully self-contained system.
• Ideally suited for removing ¼" to 1" OD tubes of all gauges in up to 4" thick tube-sheets.
• Unit comes complete with the Pulling Gun and Hydraulic pump.
• The spears are easily & quickly replaced.

• Spears
• Nose Piece
• Spear Lock & Spear Lock Removal Tool
• Spring Balancer for supporting the Pulling Gun

• One of the most commonly used style of pullers around, used to pull stubs or entire tubes with 30 tons of "Power".
• 6" of pull in single stroke, when used with the "Double Horseshoe Adaptor" can pull up to 12" without resetting
• Proven in performance and usefulness
• Can be used to pull tubes from ½" up to 3" of all gauges and tube-sheets up to 8" thick.
• Foolproof construction and simple to operate.

• Compatible with other manufacturers same style (Pine Jenny, Hollow Core Ram, etc…) spears and accessories.
• Manufactured to enhance performance & increase longevity.

---

• Available for ½" thru 3" tubes of all Gauges.

Designed for fast removal of all tube types from Condensers, Heat Exchangers, and Boilers. A rapid stroke allows the removal of up to 10 tubes a minute with minimal operator effort. Gripping and pulling performed in single operation. Insert puller into the tube and actuate, the jaws will grip the tube ID and pull out the tube.

• Available in two sizes:
• CTP-900 for 5/8" 17 Gauge thru 1 ¼" 24 Gauge.
• CTP-1100 for 1 ½" 10 Gauge thru 2" 24 Gauge.
• Pneumatic hydraulic pump standard.

• Collet Jaw Sets
• Tie Rods
• Support Collar
• Sleeve Model
• Pulling Collar Model

• Used for small. Light duty pulling jobs
• Using a wrench screw the spear "A" into the tube then begin pulling by turning nut "B". After tube is free from the tubesheet remove by unscrewing the spera "A" while holding the tube with channelocks or a pipewrench.

---

• Available for ¼" thru 1 3/8" tubes of all Gauges.