Toll Free: (800) 456-8721
Isolate & test sections of piping without the need for flanges! The standard plugs can be used for test pressures up to 3,000 PSIG, in line sizes from 1/2" to 24" and schedules 40 or 80 pipe. This test plug is held in place as the steel threads grip tight with neoprene seals - all by tightening one compression nut!
High-pressure pipe testing is safer than ever before, thanks to USA Industries' GripType High-Pressure Test Plug. Unlike other plugs that can loosen and eject under high pressure - even becoming dangerous projectiles - the GripType Test Plug actually uses test pressure to seal more securely against the pipe's inner diameter. The greater the pressure - the tighter the grip! The result is safer installation, better sealing and all around safer testing.
A SPECIAL WORD OF CAUTION: Pressure testing can be an extremely hazardous operation and safety precautions should be strictly adhered to. All connections, valves, flanges and other fittings should be checked for suitability to test pressure. Verify the line ID & Plug Range match. Most importantly - Never stand or pass in front of any test plug or other enclosure while test is in progress. If plug discharges during a test, serious injury or death could occur.