Toll Free: (800) 456-8721
Product Features• 4 Configurations - 90 degrees, 135 degrees, straight or flex shaft
Rod out tools or bleeder cleaners (aka orifice cleaner or tap reamer) allow clogged bleed, drain, vent and instrument tap valves to be cleaned during normal operations safely and efficiently while completely containing the product. Properly using our tool eliminates the possibility of dangerous product releases, which can result in your personnel and others being exposed to unsafe and hazardous conditions. Our rod out tools are rated up to 1000° F and 1,000 PSIG when following usage guidlines and are available in four model types.
Parts for these new generation rod out tools / bleeder cleaner can be replaced in the field, ending the need for factory maintenance. These tools prevent personnel exposure, vapor releases, explosions and fires when bleeder valves, vents, drains and instrument taps must be cleared during normal operating conditions.
Simple to use:
Screw the end connector onto the item needing cleaning, close the bleed valve, open the process valve, insert the shaft while rotating the handle. After the line has been cleared fully, back out the shaft, close the process valve, open the bleed valve and disconnect the tool... You now have a safely cleaned line!
Straight Rod Out, Flexible Rod Out, 90 Degree Angle Rod Out, and 135 Degree Angle Rod Out.
All components supplied conform to ANSI, ASME, ASTM Standards for Dimensions. Manufactured under our ISO 9001:2008 Quality Assurance Program.